Assembly Checklist | ✓ | ||
Aircraft | Body/ Shell | Condition | ✓ |
Bolts | Security | ✓ | |
Motors | Condition | ✓ | |
Propellers | Condition/ Security | ✓ | |
Command Unit | Body | Condition | ✓ |
Antenna | Position | ✓ | |
Battery | Fully Charged | ✓ | |
Flight Mode | Set | ✓ | |
iOSD | Body | Condition | ✓ |
Connection | Install | ✓ | |
Battery | Fully Charged | ✓ | |
Position | Glare Prevention | ✓ | |
Payload | Attachment | Security | ✓ |
Lens | Clean | ✓ | |
Gimbal Guard | Removed | ✓ | |
Media Cards | Formatted/ Installed | ✓ | |
Battery | Body | Condition | ✓ |
Charge | Fully Charged | ✓ | |
Temperature | Optimum (>15℃) | ||
Install | Secure |
Functional Checklist | ✓ |
Power on Command Unit | |
Power on Aircraft | |
Check Firmware Version | |
Enable Multiple Flight Modes | |
Set Return to Home Altitude | |
Disable Beginner Mode | |
Set Max Flight Distance | |
Set Max Flight Altitude | |
Set Failsafe [Return to Home/ Land/ Hover] | |
Controller Stick Mode (Default Mode 2) | |
Battery Temperature Optimum (>15℃) | |
Battery Cell Voltage within threshold (0.05v) | |
Sensor State (Calibrate Compass/ IMU as required) | |
GPS Signal | |
RF Check | |
CLEAR FOR TAKE-OFF |
Take-Off Checklist | ✓ |
Check Surroundings and Separation Distances | |
Start Motors | |
Stop Motor | |
Start Motors | |
Check Right Stick Response | |
Ascend to 10m | |
Hold the position and observe for 10 Seconds | |
Stick Checks | |
COMMENCE OPERATION |
Landing Checklist | ✓ |
Select TOLS | |
Check FOD | |
Check Surroundings and Separation Distances | |
Aircraft Orientation | |
Descend | |
Position | |
Land | |
Stop Motors | |
UA Off | |
CU Off | |
FLIGHT COMPLETE |
Between Flight Checklist | ✓ |
Remove and replace battery | |
Note flight times | |
Between Flight Inspection | |
Aircraft Power On | |
RETURN TO FUNCTIONAL CHECKLIST |
Post Flight Checklist | ✓ |
Notify ATC | |
Disassemble Aircraft | |
Operating Site Closure | |
Equipment Accounting | |
Complete Remote Pilots Logbook | |
Flight Crew Debrief | |
OPERATION COMPLETE |