Drone Ag Limited // Operating Safety Case

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

Assembly Checklist

Aircraft

Body/ Shell

Condition

Bolts

Security

Motors

Condition

Propellers

Condition/ Security

Command Unit

Body

Condition

Antenna

Position

Battery

Fully Charged 

Flight Mode

Set

iOSD

Body

Condition

Connection

Install

Battery

Fully Charged 

Position

Glare Prevention

Payload

Attachment

Security

Lens

Clean

Gimbal Guard

Removed

Media Cards

Formatted/ Installed

Battery

Body

Condition

Charge

Fully Charged

Temperature

Optimum (>15℃)

Install

Secure


Functional Checklist

Power on Command Unit 

Power on Aircraft

Check Firmware Version

Enable Multiple Flight Modes

Set Return to Home Altitude

Disable Beginner Mode

Set Max Flight Distance

Set Max Flight Altitude 

Set Failsafe [Return to Home/ Land/ Hover]

Controller Stick Mode (Default Mode 2)

Battery Temperature Optimum (>15℃)

Battery Cell Voltage within threshold (0.05v)

Sensor State (Calibrate Compass/ IMU as required)

GPS Signal

RF Check

CLEAR FOR TAKE-OFF


Take-Off Checklist

Check Surroundings and Separation Distances 

Start Motors

Stop Motor

Start Motors

Check Right Stick Response

Ascend to 10m

Hold the position and observe for 10 Seconds

Stick Checks

COMMENCE OPERATION


Landing Checklist

Select TOLS

Check FOD

Check Surroundings and Separation Distances 

Aircraft Orientation

Descend

Position

Land

Stop Motors

UA Off

CU Off

FLIGHT COMPLETE


Between Flight Checklist

Remove and replace battery

Note flight times

Between Flight Inspection

Aircraft Power On

RETURN TO FUNCTIONAL CHECKLIST


Post Flight Checklist

Notify ATC

Disassemble Aircraft

Operating Site Closure

Equipment Accounting

Complete Remote Pilots Logbook

Flight Crew Debrief

OPERATION COMPLETE


  • No labels