The DJI Mavic 3 Enterprise and Multispectral drone system support RTK GPS
You’ll also need:
An RTK attachment for the drone
Access to RTK correction from a network
A stable internet connection
Phone hotspot ok, 4g dongle/portable wifi ‘MiFi’ better!A Skippy Scout Enterprise account
Feel free to contact us if you need any of the above!
When you are not using RTK, please remove the antenna from the drone, as it can cause issues with normal GPS!
1. Using the RC Enterprise controller
We’ll assume you have Skippy Scout installed and know how to use it…
2. Activate RTK in DJI Pilot
Once you’re on location and ready to fly…
Power on the drone at take-off position
Open the DJI Pilot app (be sure to force-close the Skippy app first)
Go to settings and the RTK section
Ensure you are connected to a stable internet connection
Connect to an RTK network, enter your network RTK login details
The RTK status should go from ‘converging’ to ‘connected’
This will take a few minutes, wait for a solid connection
3. Use Skippy Scout with RTK
Open Skippy Scout, choose your field and scout now
On the flight screen wait for the check, and GPS should read ‘RTK’
You’re ready to fly - tap ‘fly now’
Sometimes you will need to wait a bit for the RTK to connect
Don't try and fly under normal GPS with the RTK antenna attached, take it off first.
You may need to jump back into DJI Pilot to check the connection when doing multiple flights/after each flight - that means force closing the other app etc etc… we’re working on making this more seamless!