Drone Ag Limited // Operating Safety Case
Post-Flight Procedures
After Each Flight:
Action | Output | Tool Used | |
---|---|---|---|
1 | Monitor drone landing |
|
|
2 | If unsuccessful:
|
|
|
3 | Ensure all images have downloaded from drone to RC |
|
|
4 | Conduct Pre-Flight Procedures | Consecutive Flights Procedures |
|
|
End of last flight Procedures (or before battery charge):
Action | Output | Tool Used | |
---|---|---|---|
1 | Monitor drone landing | Camera feed | base station web |
2 | If unsuccessful:
|
| airdroid |
3 | Close base station drawer | Camera feed should show closing drawer | base station web |
4 | check drone status in app for errors |
| airdroid |
5 | Ensure all images have downloaded from drone to RC |
| airdroid |
6 | Power off drone | Camera feed should show drone powered off, RC will disconnect from drone | base station web |
7 | Initiate drone battery charge | Turn interior lights off, green flashing drone battery status light should be visible to show charging | base station web |
8 | Check RC is charging, if not initiate charge |
| base station web |
9 | Allow all images to upload from the RC to cloud: Check metabase to confirm upload
|
| airdroid base station web
|
10 | Power on internal lights and check drone via camera feed |
|
|
11 | power off RC | Airdroid feed should say ‘shutting down’ | airdroid |
12 | once all charged, power off base station |
| ecoflow |
13 | check main power status, start generator if needed |
|
|
Drone Ag Limited // Version 2.5.1 // 28/10/2024
© Drone Ag Limited – 2024
All rights reserved. Reproduction of this publication is not permitted by any person without the expressed permission of the Accountable Manager of Drone Ag Limited.